Press Release
¡¡

WaveRunnerXi-A Series ,New Architecture Maximizes Speed &  Performance

LeCroy Corporation today announced the launch of the new line of WaveRunner digital oscilloscopes, M-Type Oscilloscopes, and Vehicle Bus Analyzers¡ªthe WaveRunner Xi-A Series. Leveraging the innovations and industrial design developed for the recently launched WavePro 7 Zi and WaveMaster 8 Zi oscilloscopes, the WaveRunner Xi-A series of oscilloscopes deliver speed, performance, and analysis capabilities beyond anything in the 400 MHz to 2 GHz bandwidth range.  range from 400 MHz to 2 GHz.

More Details for WaveRunnerXi-A Series

¡¡

New Class of Instrument Combining Functions of Signal Generator,

BERT, Protocol Editor, and Serial Data Analysis System

LeCroy Corporation, a leading supplier of oscilloscopes, protocol analyzers and serial data test solutions, today announced the launch of a new class of instrument, the PeRT3 Protocol-enabled Receiver and Transmitter Tolerance Tester.

 PeRT3 not only measures adherence to specifications, but provides deeper insight through the examination of the entire performance envelope of the system under test. Serial data standard support includes protocol handshake, loop-back and Frame Error Rate analysis as well as receiver compliance testing for PCI Express®, SATA, SAS and USB 3.0.

More Details for LeCroy PeRT3

¡¡

World's Highest Bandwidth Oscilloscope-WaveMaster® 8 Zi Series 4 - 30 GHz 

LeCroy Corporation's new line of WaveMaster digital oscilloscopes, Serial Data Analyzers, and Disk Drive Analyzers-the 8 Zi Series-provides up to 30 GHz of bandwidth, 80 GS/s of sample rate, 512 Megapoints of analysis, and greater than 15 GHz edge triggering. With exceptional instrument responsiveness.

10-100 times faster analysis processing time, a large 15.3", 16:9 high-definition touch screen display (50% larger than 12.4" displays), the precision of Eye DoctorTM signal integrity tools, and both 50 ¦¸ / 1 M¦¸ input capability, the WaveMaster 8 Zi Series is the most versatile oscilloscope platform available.

Upgrade available from 4GHz up to 30GHz.

More Details for LeCroy WaveMaster 8 Zi

¡¡

SDA II¡ª The Next Generation of Serial Data Analysis

LeCroy's SDA 7 Zi Oscilloscope with SDA II redefines serial data analysis in an oscilloscope. While many oscilloscopes measure compliance, LeCroy's SDA II goes beyond compliance testing with the introduction of five new debugging methodologies that

1) visually predict bit error rate directly on the eye, 2) provide dual methods of decomposing jitter that are presented both numerically and with insightful displays, 3) provide Quick-View, for intuitive combination eye and jitter breakdown master display, 4) measure millions of unit intervals at speeds up to 50 times faster than any other oscilloscope, and 5) integrate both compliance testing and SDA II debugging tools for complete drill down to find the source of the failure.

More Details for LeCroy SDAII

Eye Doctor™ II Advanced Signal Integrity Tool

  • Eye Doctor II provides the channel emulation and de-embedding tools that engineers need for the next generation of serial data standards
  • Adds precision to signal integrity measurements
  • Vital for anyone using an 8 GHz or higher oscilloscope
  • Seamlessly integrates into LeCroy's SDA II software for eye diagram and jitter analysis
  • Creates eye diagrams 50x faster than existing solutions
  • Uses industry standard Touchstone format S-parameter files for fixture and channel definition.
  • Ability to read single ended or mixed mode S-parameter files
  • DFE, FFE and CTLE Receiver Equalization
  • Fully integrated into the user interface which allows the engineer to use additional LeCroy tools for post-processing
  • Use Eye Doctor II¡¯s Advanced mode to:
    • Flexibly arrange components to allow any combination of de-embedding or emulation for Virtual Probing™ of any point in the test circuit not otherwise accessible
    • Increase measurement accuracy through the use of a more advanced transmitter and receiver termination model that incorporates customerspecific characteristics

More Details for LeCroy Eye Doctor II

New Sierra M6-4™ SAS/SATA 6G Protocol Verification System

LeCroy Corporation, a leading supplier of oscilloscopes and
serial data test solutions, is pleased to announce its Sierra M6-4 verification system; the most complete protocol design and test solution for Serial Attached SCSI and Serial ATA.

The new Sierra product family sets unprecedented standards for performance while incorporating a complete range of features for both SAS (SAS2) and SATA (SATA6G) in a single, economical system.

More Details for Sierra M6-4

LeCroy Introduces New WaveAce™ Oscilloscopes for Simple, Fast and Efficient Debug

LeCroy Corporation introduces the WaveAce™ series of digital oscilloscopes that expands its line of portable, affordable and easy to use oscilloscopes in the 60 MHz to 300 MHz range. The WaveAce™ improves troubleshooting and shortens debug time by providing unique features such as long memory, a color display, extensive measurement capabilities, and advanced triggering. A streamlined, time-saving user interface provides quick access to all important controls. With its USB host and device ports the WaveAce easily connects to a memory stick, PC or printer. The variety of standard acquisition modes and advanced triggers simplifies capturing even the most complex waveforms making the WaveAce a valuable tool for design, debug and troubleshooting.

More Details for WaveAce

LeCroy Introduces the World¡¯s First USB 3.0 Protocol Analyzer Exerciser System
¡¡


LeCroy Corporation, a leading supplier of oscilloscopes and serial data test solutions, announces its Voyager verification system, the world¡¯s first protocol analyzer for USB 3.0, also known as SuperSpeed USB. Using custom front-end circuitry developed in conjunction with LeCroy¡¯s 5 Gbps PCI-Express platform, the Voyager analyzer provides simultaneous protocol capture of both USB 2.0 and USB 3.0 signaling. Available with an integrated exerciser option, this sixth generation verification platform is LeCroy¡¯s complete solution for testing USB devices, systems and software.

                    

¡¡

¡¡

More Details for USB 3.0 Protocol Analyzer

WavePro7Zi,SDA7Zi & DDA7Zi

LeCroy Corporation's new line of WavePro digital oscilloscopes, Serial Data Analyzers, and Disk Drive Analyzers¡ªthe 7 Zi Series¡ªintegrates performance, speed, and a user interface optimized for analysis to enhance the design, debug and validation process beyond any other instrument in the 1.5 GHz to 6 GHz bandwidth range. A superior feature finder, a new rare event capture technology, and the deepest toolbox with the greatest horsepower combine for powerful debug capability. Exceptional responsiveness and 10¨C20 times faster processing throughput lead to more efficient validation. A new form-factor and the largest display available on any oscilloscope make finding root cause easier. The breakthrough performance of the WavePro 7 Zi Series provides engineers with deeper insight into electronic design problems than possible before.

More Details for WavePro7,SDA7Zi & DDA7Zi

BERTScope Digital Communications Receiver 700-1650 nm Reference Receiver

The BERTScope Digital Communications Receiver (DCRJ) optical reference receiver is a flexible, multi-functional instrument that complements the powerful signal integrity analysis capabilities of the BERTScope S.

The DCRJ is designed for 10 Gb/s telecommunications testing, possessing both optical and single-ended electrical data inputs. Combine the DCRJ with the BERTScope S 12500B signal integrity analyzer for the ability to look deeper into device performance. Generate, measure, and analyze jitter from 5 kHz to >80 MHz to test compliance, characterize performance and design margin, and to precisely see and troubleshoot device behavior.

More Details for BERTScope DCRJ 11000A

PCI Express 2.0 Summit Z2-16 Protocol Exerciser.

LeCroy PSG is pleased to announce the PCI Express 2.0 Summit Z2-16 Protocol Exerciser.The Summit Z2-16 is the third generation exerciser from LeCroy.It is used for generating protocol traffic to test devices that support the PCI Express 2.0 specification including a 5GT/S data rate. The Summit Z2- 16 works at both PCI Express 2.0 and 1.x specifications. It supports x1 to x16 PCI Express lanes. It is important to note that it will support legacy scripts from the PETrainer product line.
This new tool will be used by validation and test engineers to check for protocol functionality of add-in cards, systems, and chips using PCI Express 2.0.

More Details for PCI Express 2.0 Summit Z2-16 Protocol Exerciser

USB Protocol Analyzer With Support for Microsoft¡¯s Windows Vista

PSG has released v2.5 for the USB protocol analyzer family. This release is available for USBTracer™ /Trainer (including Classic), USB Mobile HS and USB Advisor.
Enhancements:
• Windows Vista 32 and Windows Vista 64 compatible ¨C     LeCroy¡¯s current USB analyzer product line
can now be installed under Windows Vista (drivers operate in 32-bit mode under Vista 64).
• New USB Device Class decodes:
o IrDA
o ATAPI
o HTTP
o IP

¡¡

More Details for USB Protocol Analyzer

Wave Expert 100H high bandwidth sampling oscilloscope

¡¡
the rates of serial data signals have increased steadily from 2.5 Gb/s to 40 Gb/s and beyond. All this speed, of course, pushes up the bandwidth requirements of oscilloscopes.

 High bandwidth oscilloscopes must have the detailed analysis capability required by next-generation standards. Adding to the measurement complexity is the emergence of receiver equalization which allows high-speed serial data links to operate error-free even when the signal is severely distorted. The WaveExpert 100H is the ideal signal integrity analysis solution for these applications.

More Details for Wave Expert 100H

Protocol Test Cardfor PCI Express® 2.0
The LeCroy Protocol Test Card (PTC) is a multimodal test board used for checking adherence to the protocol-oriented sections of the PCI Express 2.0 specification.

This new tool will be used by validation and test engineers to check for functionality and interoperability of add-in cards, systems, and chips using PCI Express 2.0.

More Details for Protocol Test Cardfor PCI Express® 2.0

FlexRay Trigger and Decode for WaveRunner Xi

Trigger on Static or Dynamic Slot IDs, or combinations of Static Slot IDs and multiplexed communication
cycle number. Apply a color-coded, easy-to-understand decode over your FlexRay signal.
Search for and find specific bytes in long acquisitions.

More Details for FlexRay Trigger and Decode

Mixed Signal Test

LeCroy's oscilloscopes can be turned into mixed-signal oscilloscopes (MSOs) with the addition of the MS-500 or MS-250 mixed-signal oscilloscope options. In addition, I2C, SPI, UART, RS232, LIN, and CAN triggering and decoding options turn these oscilloscopes into all-in-one analog, digital, and serial data trigger, acquisition, and analysis machines.

More Details for Mixed Signal Test

Contact us for a demo or quotation.